.
The N235 metal had a total of five stages of application.
With each stage of application, the energy released by the N235 metal would increase exponentially.
The information of the five stages of application was stored in Izur's core source code. Even Shi Lei could not directly access all the information.
The origin of the advanced pseudo-artificial intelligence system Izur was very mysterious.
Although the advanced pseudo-artificial intelligence system Izur's core authority was in Shi Lei's hands, Izur's core source code was not completely written by Shi Lei.
Shi Lei had repeatedly investigated Izur's origin, but he could not get an answer. Shi Lei did not pursue the matter further.
Since Izur's core authority was in his hands, Shi Lei was not worried about any accidents.
Moreover, no matter how strange Izur was, could it be stranger than Shi Lei who was reborn six years ago?
Because of the discovery of a new N235 metal vein in the Bermuda Triangle, Shi Lei suddenly wanted to know the second stage of application of the N235 metal.
The first stage of application of the N235 metal would release about 40 times more energy than hydrogen and 120 times more energy than gasoline.
Moreover, because the N235 metal could release electricity directly, there was less loss in energy conversion. Its application value was even higher in the age of electrification!
"Reviewing authority, please wait!" Izur's cold voice reminded Shi Lei.
Shi Lei waited patiently on the surface, but he was feeling uneasy.
Fortunately, after waiting for about 30 seconds, Izur prompted him again.
"Sir, do you want to view the second stage of application of the N235 metal?
Warning, this information is classified with the highest level of authority. The system will adopt the highest level of authority confidentiality measures by default, "Izur reminded Shi Lei.
The highest level of authority confidentiality measures indicated that the second stage of application of the N235 metal could not be copied or saved. It could not be printed on paper. Moreover, it could only be read in an environment with a camera and a dynamic behavior recognition engine.
In an environment with a camera and a dynamic behavior recognition engine, the system could determine whether there was a camera or a camera.
If there were cameras and photographic equipment, the system would not open the second phase application of N235 metal.
"Check!" Shi Lei answered affirmatively.
"Yes, sir!" Izur displayed the second phase of the application of N235 metal.
The first difference between the application plan of the second stage and the first stage was the materials used to make the ultra-high speed multi-frequency current driver.
The core material of the ultra-high speed multi-frequency current driver in the first phase of the application plan is made of high-purity copper.
Although the exterior was covered with steel materials for protection, it was still very dangerous.
However, the steel material was only a protective material. Just like the protective cover of a mobile phone, it was only a protective material. It was not a part of the ultra-high-speed multi-frequency current driver.
The second phase of the ultra-high speed multi-frequency current exciter required a core made of high-purity silver.
According to the information provided by Izur, the core material of the ultra-high speed multi-frequency current driver for the second phase of the application plan required at least 99.99% pure silver.
Silver with a purity of 99.99% was called Ten Thousand Feet Silver.
Ten Thousand Feet Silver had a soft texture. It was not an easy task to make the core of the ultra-high speed multi-frequency current driver.
After all, the core of the ultra-high speed multi-frequency current driver required very precise size parameters. The error must be controlled within the range of 100um. This kind of process was very difficult to achieve.
At the very least, ordinary CNC machining centers would never be able to achieve ultra-precise processing at the micron level.
In daily life, the common silver processing methods were only 92.5% and 99.9% pure.
In the field of silver jewelry and handicrafts, S925 was the standard material.
Silver with a purity of 99.9% was usually only used to make silver bracelets and simple rings.
This was because the higher the purity of the silver, the softer the texture.
If the silver of S999 was a product with a complicated manufacturing process, it would definitely have various tragic deformations.
As for Ten Thousand Feet Silver?
This was not a national standard. Ordinary organizations could not test and determine whether Ten Thousand Feet Silver had reached the standard, let alone the technology to process Ten Thousand Feet Silver.
What seemed like a simple requirement was actually not simple at all!
However, the return of the ultra-complicated manufacturing process was worth it.
This was because the energy produced by the second phase of the N235 metal application was definitely not comparable to the energy produced by the first phase of the application!
The energy released by the N235 metal in the second phase of the application was about one percent of the nuclear fission of the same mass of Uranium-238.
According to the calculation of the energy produced by the nuclear fission of Uranium-238, the energy released by one kilogram of Uranium-238 was about the same as the energy released by the complete combustion of 2,500 tons of standard coal.
Then, the energy released by one kilogram of N235 metal was about the same as the energy released by the complete combustion of 25 tons of standard coal.
According to the conversion of the heating value of standard coal, gasoline, and hydrogen, the energy released by one kilogram of N235 metal in the second phase of the application was about the same as the energy released by the complete combustion of 17,000 kilograms of standard gasoline, or the energy released by the complete combustion of 5,645 kilograms of hydrogen.
Under the first phase of the application of N235 metal, one kilogram of N235 metal was equivalent to 40 kilograms of hydrogen, or 120 kilograms of gasoline after the complete combustion of the energy released.
From the first phase of the application to the second phase of the application, the energy release rate of N235 metal had increased by 141 times!
A whole 141 times!
If the second generation of The First Light was equipped with the second phase of the application of the ultra-high speed multi-frequency current exciter, it could be said that there was almost no energy limit, and it could waste energy however it wanted!
Shi Lei looked at the N235 metal in the second phase of the application. He was completely shocked to see that it had such a strong energy release rate.
"This is only the second phase of the application!
What if it is the final fifth phase? "Shi Lei said to himself.
"Sir, unable to give an answer, the system did not search for the relevant content." Izur gave a disappointing answer.
Shi Lei was not surprised by this answer at all.
Shi Lei had already guessed that Izur's core source code would only unlock the information of the next phase of the application after a certain condition was met.
As for what the condition was, Shi Lei did not know!
Shi Lei only wanted to solve the second phase of the application of N235 metal, the ultra-high speed multi-frequency current exciter!
After reading the information of the second phase of the application of N235 metal, Shi Lei quickly called Li Chai. After Li Chai picked up the phone, Shi Lei immediately told him about the relevant situation. Finally, he asked, "Little Li Chai, do we have a way to process the Ten Thousand Feet Silver with ultra-precision?"
After listening to Shi Lei's introduction, Li Chai immediately smiled bitterly. "Stone Head, I'm afraid it's not possible!"
"Why?" Shi Lei asked curiously. "Processing silver metal isn't difficult, right?"
"Stone Head, normal silver metal processing isn't difficult!"
Li Chai explained helplessly. It was a little difficult to explain to a mechanical engineering noob like Shi Lei.
"You know the properties of silver metal, right?
The higher the purity of the silver metal, the softer the texture.
Let's not talk about the difficulty of processing soft metals for the time being. Let's talk about silver metal with 99.99% purity. Where should we get it? "
"Uh?
Can't you buy Ten Thousand Feet Silver in a jewelry store? "
Shi Lei asked a little innocently. In Shi Lei's opinion, whether it was Ten Thousand Feet Gold or Ten Thousand Feet Silver, they could all be bought in jewelry stores.
Listening to Shi Lei's words, Li Chai faintly felt a headache. "Stone Head, can you have some common sense? Why would a jewelry store sell Ten Thousand Feet Silver?"
Li Chai explained in detail to let Shi Lei understand that Ten Thousand Feet Silver was not that easy to purify. He then continued, "I can ask my father to find a way to solve the problem of Ten Thousand Feet Silver."
Li Chai's father was in charge of the first research institute of the Chang 'an Aircraft Industry.
In the environment of the aerospace laboratory, it was not difficult to purify Ten Thousand Feet Silver.
Li Chai's plan was a complete scam!
"Very good!
With the Ten Thousand Feet Silver, there shouldn't be any other problems, right? "Shi Lei said with slight anticipation.
Li Chai still smiled bitterly. "Of course there's a problem, and it's a big problem!
As I said just now, Ten Thousand Feet Silver is very soft. CNC machining centers can't process it at all. "
"Then what should we do?
Xiao Li, let me tell you, no matter what method you use, you must create a Ten Thousand Feet Silver ultra-high-speed multi-frequency current exciter! "Shi Lei gave the necessary order.
Li Chai thought for a while and said, "Stone Head, if you want to process Ten Thousand Feet Silver, it's not impossible!"
"Oh?
What method is there? "
Shi Lei's eyes lit up. "As long as you can complete a Ten Thousand Feet Silver ultra-high-speed multi-frequency current exciter, you don't have to worry about the cost!" Shi Lei expressed his wealth in an imposing manner.
"Stone Head, do you know about laser processing technology?"
After Li Chai asked the question, he wanted to slap himself. How could Shi Lei know about such high-end processing technology?
As expected, Shi Lei gave a negative answer.
"Stone Head, you just said that the second-stage application of the ultra-high-speed multi-frequency current exciter needs to be controlled within 100 microns, right?
Normal CNC machining centers can't do it at all.
Only laser processing technology can meet this requirement.
However, our country's laser processing technology is relatively backward. "Li Chai said a regrettable fact.
Xia Xia's laser processing technology was indeed relatively backward.
This was because Xia Xia's manufacturing and processing companies rarely had precision processing companies.
On the other hand, Voisin's manufacturing and processing companies were mostly precision processing companies.
For example, the long-monopolized bearing company!
"Which country has it?" Shi Lei asked without hesitation. As long as other countries had it, Shi Lei would have a way to get it!
To borrow a classic saying: In this world, money is not omnipotent, but money can solve all problems.
As long as Shi Lei was willing to spend money, even if the laser processing equipment was an embargoed product, it must be able to enter Xia Xia!
.